ChamSys MagicQ Bedienungsanleitung PDF herunterladen (Seite 114)

MagicQ Software Change Log 101 / 110

Fixed lock up problem when using ChamNet this could occur if devices were set in ChamNet mode or when the Net Manager

window was open. Seen mostly on MagicQ Rack Mount systems but could also occur on MagicQ consoles. All users using

ChamNet should upgrade to this version.

In some cases the web log ﬁle (magicwweb.log) could get very large and cause disc space problems. Users can delete the web

log from the File Manager at any time.

Auto activation of PB1 on start up did not work on MagicQ consoles - all the other activation methods worked ﬁne. Therefore it

is possible to work around it using an auto activated macro 1 or cue stack 1. #0001094.

Fixed problem with using Faders with the setting HTP always active together with a release time. If the Cue stack was set as

a default playback and the playback was not Page 1 then the playback would not release correctly and could go erroneously to

100% after some time.

Fixed problem with Playbacks set to priority Above Programmer. HTP channels on these playbacks would still get overridden

by the Programmer.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 122 123

Keine Kommentare

ChamSys MagicQ Bedienungsanleitung Seite 114