ChamSys MagicQ Bedienungsanleitung PDF herunterladen (Seite 18)

ChamSys Ltd www.chamsys.co.uk

MagicQ User Manual 18 Version 1.3.0.0

In order to control intelligent heads it is necessary to be able to select which heads to use. The MagicQ

console keeps track of the currently selected heads to enable it to determine which heads to apply changes to.

The operator can select head individually or can use groups to recall configurations of heads that are used

frequently.

The console automatically generates a group for all the heads of a particular head type. In addition new

groups can easily be recorded.

The Group Window has two views. VIEW GROUPS enables selection of heads using groups whilst VIEW

HEADS enables individual selection of heads.

In VIEW GROUPS, pressing the touch screen for a particular group selects all the heads associated with that

group. All other heads are deselected. To select multiple groups, press SHIFT and a group to toggle the

group in and out of selection.

In VIEW HEADS, individual heads are selected / deselected by pressing the touch screen. Use PG UP and

PG DN to scroll through the heads.

3.8 Recording a Group

Select the heads you want in a group in the VIEW HEADS view of the Group Window.

Change to the VIEW GROUPS view.

Press RECORD and then select the group you wish to record either by pressing the touch screen or by using

the cursor keys and then pressing ENTER.

3.9 Naming a Group

When recording a group, if you key in a name before pressing the touch screen (or pressing ENTER) then

the group will be named at the same time as it is recorded.

You can name a group at any time by keying in the name, pressing SET, and pressing the touch screen.

If you do not have a keyboard then press SET and select the group to name by pressing the touch screen (or

using cursor keys and ENTER). A keyboard window will be displayed for you to enter the name on screen.

3.10 Recalling a Group

Once a group has been recorded then pressing the touch screen for the group will make all the heads in the

group selected. All other heads will be deselected.

3.11 Locating Heads

The first action you are likely to want to do is to locate the heads – i.e. to put them into a starting position.

Select the required heads and then press the LOCATE button.

If the heads enable DMX control of the striking of the lamp then you may need to “Lamp On” the head in

order to see the beam. Select the heads and then press SHIFT LOCATE. This runs the "Lamp On" macro.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 138 139

Keine Kommentare

ChamSys MagicQ Bedienungsanleitung Seite 18