ChamSys MagicQ Bedienungsanleitung PDF herunterladen (Seite 33)

ChamSys Ltd www.chamsys.co.uk

MagicQ User Manual 33 Version 1.3.0.0

In VIEW HEADS you can invert the pan and tilt channels of moving heads and also swap the pan and

tilt channels. Pressing ENTER in the appropriate field changes the field value.

Individual channels can also be inverted in VIEW CHANS if required.

5.9 Minimum and maximum levels

You can set minimum and maximum levels for each patched channel from the VIEW CHANS view. This is

useful for setting pre-heat on dimmers or for limiting output values of certain lamps where power is tight.

The minimum and maximum levels have absolute over-ride over all other playback and programming on the

console. Master faders and the DBO button do not affect the minimum and maximum levels.

Minimum levels can be useful to force a minimum light level on a stage, for example during a changeover.

5.10 Dimmer curves

The console supports a number of dimmer curves. The user interface to enable the user to change the

dimmer curve will be made available in a future version of software.

5.11 Changing the DMX channels of dimmers and heads

Dimmers and Heads can be moved to different channels as required. When they are moved all the

programming and palettes associated with them also moves to the new channels.

In VIEW HEADS, simply edit the DMX field with a new address.

In VIEW CHANS, press the MOVE button, then select the channel field of the Dimmer you wish to

move. Then select the channel field of the destination. Heads are moved in the same way as Dimmers

– for the source channel select any of the channels of the Head.

If you try and move to a location where there are already channels patched then the console will prompt

whether you wish to continue and move the already patched channels aside. If you confirm YES the

already patched channels will be moved to the next free locations. If you confirm NO then no move

will be performed.

Multiple Dimmers and Heads can be moved at a time using SHIFT and the cursor keys. When making a

change to multiple heads the change defaults to an absolute change – thus the first head will be moved

to the specified address and the next heads to the addresses immediately following. To make a relative

change enter a / after the new address - i.e. to move 4 heads from 1-1 to 2-1, but keeping the relative

DMX offsets between the heads, enter 2-1/. You can also specify an explicit offset to use, just like

when patching e.g. 2-1/20.

5.12 Editing Head personality

You can modify the personality of a Head or create a new personality in the Head Editor. Choose the

head you wish to edit and then press the EDIT HEAD soft button.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 138 139

Keine Kommentare

ChamSys MagicQ Bedienungsanleitung Seite 33